血细胞分类计数器使用方法

QYZL series inligent integration distillation apparatus is based on laboratory distillation pretreatment procedures, automatic constant temperature heating, distillation end point control, cooling water circulation in the integration of new inligent distillation processing equipment. The instrument has the functions of precision temperature control, automatic anti - pouring, heating uniformity, riot boiling, and inligent terminal control. Easy to use, energy saving and environmental protection. The results are accurate and reliable, and the recovery rate is over 95%.
The instrument can be widely used in environmental protection, the CDC, aquaculture, water supply and drainage, universities, research institutes, factories and mines enterprises and other kinds of chemical laboratory needs distillation process, such as volatile phenol, cyanide, ammonia nitrogen, kjeldahl nitrogen oil moisture distillation process of the project.
Main technical indicators:
1. Heating method: imported far infrared ceramic heating furnace, infrared radiation heating (no flame heating, waterproof);
2. Heating unit: 6 or 4, single hole single control;
3. Heating time: 5-8min;
4. Distillation speed: 12ml/min;
5. Control of distillation end point: automatic detection of the end function of distillation, with dual control of weighing and time, and control of the distillation volume at + or 2ml.
High degree of automation;
6. Single furnace heating power: 0-450w (single hole adjustable);
7. Maximum heating power: 0-2700w (adjustable);
8. Cooling mode: closed internal circulating reflux system without external cooling water source;
9. Anti-pour suction: it is equipped with anti-vacuum solenoid valve, which has the function of anti-retrofit.
10. Time control: 0-200min adjustable;
11. Distillation flask specifications: 500mlX6, 250 X6 or 500mlX4, 250 X4 more specification optional;
12. Rated voltage/frequency: 220V/50HZ;

血细胞分类计数器使用方法

血细胞分类计数器，是集计数、统计、显示为体的微电脑控制的十组二位十进制计数仪器。仪器用十只薄膜开关按键计数，可同时显示十组数据和总数。
按动“%”键，仪器可显示各组数据所占百分比的整数位，再按次则显示各组数据百分比的小数位（此时指示灯亮）。计数准确可靠，符合临床检验血常规
结果，并又初步提示分辨细菌感染或病毒感染。仪器造型美观，结构合理，数据清晰，使用方便，特别适用于中、小型医院临床检验血细胞分类计数。使用说明有如下几点：
1、 仪器接通电源，打开电源开关，十组数据和总数都显示“0”，若有显示不为“0”，则按下“复位”键，使各组显示数据清零。
2、 仪器把zui常用的“中性分叶核、中性杆状核、淋巴细胞、单核细胞、嗜酸性粒细胞、嗜碱性粒细胞、中性晚幼粒、变异淋巴、幼稚细胞”
九种血细胞计数对应在九个计数键上，若进行上述九种血细胞计数，可直接按动相应的计数键进行计数。
3、 仪器没有定义的其它血细胞的分类计数，用户可在第“- -”组计数器上自行定义，按动相应的计数键进行计数。
4、 十只计数键中按动其中任只键，都会听到蜂鸣器的“嘟”声，表示计数有效，相应的计数器加“1”，而Σ总数同时加“1”。
若计数时没有听到蜂鸣器的“嘟”声，则表示该次计数无效，需重新计数。
5、 当计数的总数达到“100”，则本次分类计数已计满，可听到“嘟”的长声，请记下各组数据。按下“复位”键，显示屏全部清零，可继续计数。
（单路计满时，总数显示“100”，单路显示“FF”。）
6、 如果计数的总数没有计满“100”，而需结束本次测量时，可按下“%”键，在听到“嘟”声后，电脑自动将各组数据换算成百分比值显示在对应的显示屏上。
如果需要再，则再按下“%”键，显示各组数据百分比的小数位（此时指示灯亮），总数不变。（单路计数未满“100”时，按下“%”键显示“ -”，
此时总数显示值即为单路计数值）。
7、 每次测量结束时，按下“复位”键，十组数据和总数Σ都为“0”，仪器恢复到初始状态，可以进行下次测量。